Food ahesive - Securing moisture absorbent pads in food packaging

When using moisture absorbent pads it sometimes is neccesary to secure the pad in the packaging to prevent it from moving or to secure additional pads on the sides or top of larger food packaging.

Hydra-Sorb pads can be secured using our indirect contact, FDA approved food grade adhesive. A small drop is all it takes and a single glue stick should easily be enough for 500+ pads.

Here is the process:

1. Use the included in your order glue stick in a suitable glue gun.
2. The glue gun needs to be set to "low" heat as otherwise the glue will melt or damage the packaging
3. Apply a small drop on the smooth side of the pad and stick the pad in the desired place in the packaging.
4. Rinse and repeat